Partial assembly is required; install joystick lever through body, push actuator into bottom of lever stem, and push up against the internal spring to connect the e-clip. Use needle nose-pliers to fasten the e-clip to the bottom of the joystick lever, pushing it into the lever's bottom groove.
Crown has released several Korean style models within the 300 numbered series, such as the 303-FK, CWL-307-FJ, and now the 309MJ. In this iteration, Crown carefully reviewed feedback from diehard Tekken players, and eschewed select characteristics from earlier models to recreate the feel of a Fanta. Much like the FK and FJ models, the 309MJ ensures installation in popular Japanese style Fightsticks such as the Mad Catz Street Fighter V Arcade FightStick TE2+ PS4/PS3/PC or Qanba Obsidian PS3/PS4/PC Fightstick.
Low Profile Collar
The 303-N main characteristic is longer travel distance, while the 307's larger actuator shortened dead zones. The 309MJ-JMS-ST25 is Crown's closest attempt to mimic the popular Myoungshin Fanta Joystick, narrowing the throw distance and a smaller, durable 16.5mm acetate plastic actuator.
One of the most prominent feedback from players when trying the earlier model 303-FK and 307-FJ is accuracy issues that arose from lack of a collar. Crown decided to incorporate a 1.5mm low-profile collar that offered the best of both worlds. The short collar allows you to install the lever into Japanese style Fightsticks or cabinets (which often come with s-plate mount points), yet it maintains the accuracy that came with use of the collar.
You can see comparison shots at Hibal.tistory.com.
The Difference in Silicone
The ST variant uses a white silicone rubber tension system with a shore A rating of 25. This is indeed lighter than the 55 shore A rating in the 307 series. Tests conducted at Hibal, however, show that the silicone is slightly thicker in the 309. Executing command input are easier, while returning to neutral is a bit tougher from the reduced tension.
Still, the benefits of the rubber tension is a faster return to neutral, which is perfect for 3D based games such as Tekken in which wavedashing and consistent movement is required. The CWL-309MJ-JMS-ST25 continues to share the same characteristics as other Fanta joysticks, with smooth, cornerless control for QCB, QCF (quarter-circle back/forward) HCB, HBC (half-circle back/forward) and full 360 motions.
The CWL-309Helpme-K-JMS-ST35 currently uses a Panasonic AM51630C69N microswitch. This model is similar to the one used in the Seimitsu LS-40 Joystick (.187 Fastener Type) with RE Plate and fastener-based LS-32 model, which uses the AM51662C5N microswitch. It has a lighter touch than the Gersung GSM-V0323A3 .187" Long Straight Hinge Lever Microswitch. Like the 303 and 307 models, each microswitch can be removed from the joystick and replaced by another. This opens up potential for customizing the switch sensitivity and performance. The body of the CWL-307FJ-JMS-ST encloses the microswitches, offering a tighter form factor than the 303-FK.
.187" to 5-Pin Conversion Harness Included with Purchase.
The CWL-309Helpme-K-JMS-ST35 utilizes a .187" connection for each microswitch - one for directional control signal, and one for ground. Most commercial and some prebuilt custom joysticks use the Sanwa JLF-H harness. Our .187 to 5-pin Conversion Harness is included with purchase.
Compatible with Crown Converter Shaft
The CWL-307F-J-W is compatible with the Crown JLF Conversion Shaft - our solution that allows you to install an interchangeable balltop or battop onto your Crown joystick. This provides a much greater amount of customization. Bundle with this Crown joystick lever to save $1.70 off retail!
CWL-309MJ-JMS-ST25 Similarities and Differences
The bottom construction of the CWL-309-HelpmeK-ST35 joystick lever matches that of the 303-FK though colored black. The microswitches are positioned closer to the actuator than the 307, and are not embedded into the housing as the 307.
Thanks to IplayWinner.com for a detailed overview of the Crown 309 models.